crwdns2915892:0crwdne2915892:0
This guide will show how to reconnect the foot support to the wheelchair after it has fallen off.
crwdns2942213:0crwdne2942213:0
-
-
Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height.
-
-
-
-
Screw in the bolt to the top socket to secure the height of the footrest.
-
-
-
Screw in the bolt attaching the footrest to the frame.
-
Screw in the lower bolt to the footrest.
-
Check that the footrest is at the desired height. If the footrest is still uncomfortable start the guide over again from step 1 using a different height to tighten bolts.
Check that the footrest is at the desired height. If the footrest is still uncomfortable start the guide over again from step 1 using a different height to tighten bolts.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 14-8, Maness Spring 2013 crwdns2935289:0Cal Poly, Team 14-8, Maness Spring 2013crwdne2935289:0
CPSU-MANESS-S13S14G8
crwdns2931471:05crwdne2931471:0
crwdns2935297:07crwdne2935297:0
