crwdns2894164:0crwdne2894164:0

crwdns2915892:0crwdne2915892:0

This guide will help you replace the connection strip between the side buttons on the outer casing and the mouse itself. Be sure to use caution when unplugging the wires, for this could result in the mouse not working properly. Also use caution when removing the plastic shell, it is fragile and it could be cracked upon removal.

crwdns2860947:0crwdne2860947:0

crwdns2890040:0crwdne2890040:0

  1. Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.
    • Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

  2. Remove the four 7mm screws using a Phillips #00 screwdriver.
    • Remove the four 7mm screws using a Phillips #00 screwdriver.

  3. Gently remove the top plastic plate of the mouse.
    • Gently remove the top plastic plate of the mouse.

    • Unplug the white cord from the circuit board.

  4. Lightly pull the two plastic sides of the mouse to remove them.
    • Lightly pull the two plastic sides of the mouse to remove them.

  5. Flip back the black plastic that holds the white connection strip in place on the side panel and the main panel.
    • Flip back the black plastic that holds the white connection strip in place on the side panel and the main panel.

  6. Gently remove the white connection strip at each end.
    • Gently remove the white connection strip at each end.

  7. Insert the blue striped ends into the white connection port on the mainframe as well as the frame with the buttons.
    • Insert the blue striped ends into the white connection port on the mainframe as well as the frame with the buttons.

crwdns2915888:0crwdne2915888:0

To reassemble your device, follow these instructions in reverse order.

Laura Rubisch

crwdns2886885:029/01/2018crwdne2886885:0

115 crwdns2915208:0crwdne2915208:0

crwdns2882065:0crwdne2882065:0

crwdns2915084:0crwdne2915084:0

University of Alabama, Team S1-G2, Bedsole Spring 2018 crwdns2886886:0University of Alabama, Team S1-G2, Bedsole Spring 2018crwdne2886886:0

UA-BEDSOLE-S18S1G2

crwdns2858115:04crwdne2858115:0

crwdns2886889:05crwdne2886889:0

crwdns2917034:0crwdne2917034:0

What is the code for the connection strip and how many pins does it have?

Thank you for the guide.

Tsuki Yomi - crwdns2853112:0crwdne2853112:0

crwdns2917038:0crwdne2917038:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 1

crwdns2894768:07crwdne2894768:0 11

crwdns2894768:030crwdne2894768:0 33

crwdns2894770:0crwdne2894770:0 1,553