crwdns2915892:0crwdne2915892:0
Make sure to be careful you keep track of which screws you are using and which screws go where when disassembling. There are different types of screws used- one type being the screws used to separate the plastic shell and the other used to unscrew the scroll wheel itself.
crwdns2942213:0crwdne2942213:0
-
-
Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.
-
-
-
Remove the four 7mm screws using a Phillips #00 screwdriver.
-
-
-
Gently remove the top plastic plate of the mouse.
-
Unplug the white cord from the circuit board.
-
-
-
-
Lightly pull the two plastic sides of the mouse to remove them.
-
-
-
Using a Phillips #00 screwdriver, remove the 5mm screw holding the scroll wheel in place.
-
-
-
Unplug the cord that connects the scroll wheel to the motherboard.
-
-
-
Slide the chip out of the scroll wheel.
-
-
-
Gently wiggle the scroll wheel up and back to remove the scroll wheel from the mouse.
-
Use your thumbs to pop the scroll wheel out from its plastic frame.
-
-
-
Place the new scroll wheel in the mount.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of Alabama, Team S1-G2, Bedsole Spring 2018 crwdns2935289:0University of Alabama, Team S1-G2, Bedsole Spring 2018crwdne2935289:0
UA-BEDSOLE-S18S1G2
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
