crwdns2915892:0crwdne2915892:0
This is a guide on replacing the M1 and M2 bumpers on the Razor Kishi v2 pro. Whether you're dealing with unresponsive buttons or simply want to refresh your controller, this step-by-step tutorial will help you restore full functionality and get back to gaming in no time. Let’s dive in and get your controller working like new!
crwdns2942213:0crwdne2942213:0
-
-
Put the device down with the bottom facing up.
-
Remove the eight 12 mm screws from the back of the controller using a T5 screwdriver.
-
-
-
Gently apply light pressure to the front top half of the controller and slowly lift it up.
-
Repeat for the opposite side of the controller.
-
-
-
-
During the disassembly of the front panel, the small M1 and M2 buttons might have fallen out of place. If they did, skip the next step.
-
-
-
Pull on the small M1 or M2 button to remove it from the controller.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.