crwdns2915892:0crwdne2915892:0
This guide demonstrates how to remove and replace a rear rack from the Raleigh M20 bicycle. This requires the removal of the old rear rack before replacing the new rear rack.
crwdns2942213:0crwdne2942213:0
-
-
Make sure that the bike is upright and stable.
-
Make sure that the rear rack is fitted on the bike.
-
-
-
Place a screw to attach the rear rack to the frame of the tire.
-
Tighten the screw with a philips screwdriver by turning it in a clockwise direction.
-
Repeat the steps above on the other side of the bike.
-
-
-
-
Place the metal holder to be even with the bar sticking out of the rear rack.
-
Line up the holes. Place a bolt to attach them together.
-
Use a philips screwdriver to tighten the bolts.
-
Do this for both sides.
-
-
-
Make sure that the rear rack is even. If it is not, redo the previous step.
-
Locate the screws on top of the rear rack. Tighten the screws using a philips screwdriver.
-
Once the screws are tightened, you are done.
-
To detach the rear rack, follow the instructions of this guide in the reverse order.
To detach the rear rack, follow the instructions of this guide in the reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 7-49, Forte Fall 2012 crwdns2935289:0Cal Poly, Team 7-49, Forte Fall 2012crwdne2935289:0
CPSU-FORTE-F12S7G49
crwdns2931471:05crwdne2931471:0
crwdns2935297:05crwdne2935297:0
