crwdns2915892:0crwdne2915892:0
This guide will illustrate how to remove the motherboard.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 5mm screws from the bottom of the device using a Phillips #000 screwdriver.
-
-
-
Place the plastic opening tool between the case and the screen.
-
Slide the tool clockwise around the case until all the clips are removed.
-
-
-
Desolder the two wires that connect the battery to the motherboard.
-
Using the blue plastic opening tool, lift the battery away from the device.
-
-
-
-
Desolder the wire connected from the speaker to the motherboard.
-
Pry the speaker from the casing with a plastic opening tool.
-
-
-
Use the spudger to lift up the black tab on all three ZIF connectors.
-
Use tweezers to remove the ribbon cables from the zift connectors.
-
-
-
Use Phillips #000 screwdriver to remove the three 3mm screws on the motherboard.
-
-
-
Use a spudger or plastic opening tool to lift up the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:06crwdne2935229:0