crwdns2915892:0crwdne2915892:0
Outline what you are going to teach someone how to do.
crwdns2942213:0crwdne2942213:0
-
-
Using a separating tool, look for a seam in the plastic casing that looks most accessible.
-
Use the prying tool to separate the front and back casing, working your way around the perimeter.
-
Utilize a card tool or a pick to assist in keeping the case separated.
-
-
-
Flip over the back of the device while keeping it close to the front, the speaker is attached to it.
-
Remove the yellow tape securing the speaker to the back casing.
-
-
-
-
Use the separating tool to pry the speaker from its surface.
-
Cut or desolder the wires to replace or repair the speaker.
-
-
-
Peel off the black tape on the battery and main-board.
-
Peel off the black tape securing the screen ribbon cable to the back of the screen.
-
-
-
Slide out the ribbon cable lock that is securing the screen ribbon cable.
-
Move the ribbon cable out of the way using tape if necessary.
-
-
-
Remove the yellow tape securing the battery to the screen.
-
Use a plastic card or pick to separate the battery from the screen.
-
Cut or desolder the wires on the battery to remove or replace it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:010crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Pasco Hernando, Team 1-1, Prince Winter 2015 crwdns2935289:0Pasco Hernando, Team 1-1, Prince Winter 2015crwdne2935289:0
PHSC-PRINCE-W15S1G1
crwdns2931471:06crwdne2931471:0
crwdns2935297:010crwdne2935297:0
