crwdns2915892:0crwdne2915892:0
This replacement guide will teach someone how to successfully remove the digital battery from the Quiksilver The Fifty50 sports watch. Before getting started make sure to grab the tools necessary and at least skim the instructions once to understand what it will look like while you are replacing the digital battery, that way there will be no surprises as you go through the steps.
crwdns2942213:0crwdne2942213:0
-
-
Place the watch (face down) on a solid surface.
-
Carefully use the screwdriver and push in one side of the strap.
-
Slowly remove the strap by pushing back one of the hidden metallic holders for the strap.
-
-
-
Gently pull the pin out of the strap.
-
-
-
Remove the four 1.1 mm screws holding the back panel in place using the Phillips #00 screwdriver.
-
-
-
Carefully separate the panel off of the watch.
-
-
-
Carefully lift the white plastic circular out of the watch.
-
-
-
-
Remove the four 1.1 mm screws located on the metallic holder using the Phillips #00 screwdriver.
-
-
-
Remove the large circular Analog battery.
-
-
-
Using the Phillips #00 screwdriver, remove the two 1 mm screws holding the circuit board to the device.
-
-
-
Remove the green circular chip using a pair of tweezers.
-
-
-
Using the Phillips #00 screwdriver, remove the 1.1 mm screw that is holding the digital battery holder in place.
-
-
-
Use the magnetic pick-up tool to remove the small screw.
-
-
-
Remove the digital battery from the socket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
UW Tacoma, Team S1-G4, Liner Summer 2019 crwdns2935289:0UW Tacoma, Team S1-G4, Liner Summer 2019crwdne2935289:0
UWT-LINER-SU19S1G4
crwdns2931471:05crwdne2931471:0
crwdns2935297:05crwdne2935297:0
