crwdns2915892:0crwdne2915892:0
This guide will help you replace your lens if they get scratched or broken.
crwdns2942213:0crwdne2942213:0
-
-
Remove the phone slide from the virtual reality goggles.
-
Take the outside cover off using the plastic opening tool.
-
-
-
Remove each screw from its place.
-
Remove four 6mm Phillips head screws.
-
Remove twelve 7mm Phillips head screws.
-
Pull out each bracket so you can see the full lens case.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the adjustable lens lever on top of the virtual reality lens.
-
Using tweezers, you will need to separate the tooth gears and remove them so the lens can fall freely out.
-
Pull the lens case out from the front of the headset.
-
-
-
With a little force, push the lens from outside in to break the lens out of the case. This will get the lens out.
-
Now replace the lens with a new one and follow the steps in reverse order to put the lens back!
-
To reassemble your device, follow these instructions in reverse order.