crwdns2942213:0crwdne2942213:0
-
-
Remove the Ni-Cad battery from the PowerBook 180.
-
Slide the arrows toward the front of the computer until the battery can slide out.
-
-
-
Removing the screws securing the bottom plate from the PowerBook 180.
-
There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.
-
-
-
-
Your computer should look like the two pictures after the bottom plate is removed.
-
-
-
Locate the modem board, which is next to the DC-in port.
-
There are two Torx T8 screws marked in red in the pictures. Remove these screws and pull up on the modem board to remove.
-
To reassemble your PowerBook, follow these instructions in reverse.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Master Techs crwdns2935289:0Master Techscrwdne2935289:0
Community
crwdns2931471:0322crwdne2931471:0
crwdns2935297:02.536crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Great guide. Worked for me of the Powerbook 140. Thanks!
