crwdns2915892:0crwdne2915892:0
If your device has poor sound quality, follow this guide to remove the speaker.
crwdns2942213:0crwdne2942213:0
-
-
Pry the seam between the screen and the case and slide it on all four sides with a large plastic opening tool until the plastic case comes off.
-
-
-
Lift the device off of the case and flip over the device so that it sits screen side down.
-
-
-
The device is now free from the plastic case.
-
-
-
crwdns2935267:0crwdne2935267:0Plastic Cards$2.99
-
Wedge a plastic card beneath the battery unit and wiggle the card side to side and up and down gently until the glue sealing the battery to the device is broken.
-
-
-
Peel back any yellow tape not directly attached to the battery.
-
Using a soldering iron, desolder the two wires that connect the battery to the motherboard.
-
-
-
Remove the two 5mm screws attached to the top right and bottom left corners of the speaker
-
-
-
Solder off the wires connecting the speaker to the device
-
-
-
Pull the speaker out of the casing to release it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
WOW so helpful!!