crwdns2915892:0crwdne2915892:0
You will need to replace the flash cover if the camera will not take clear pictures, has a cracked or scratched cover. You will need to use the Shutter Switch Replacement guide as a precursor guide.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the four 5mm screws on the base of the camera. Remove the two pieces of the base.
-
-
-
Unscrew the four 5mm screws on the top of the inside base piece.
-
Unscrew the two 5mm screws on the bottom of the inside base piece which is near the strap.
-
-
-
-
With force separate the front white piece from the back of the camera. You will use your hands to pull it apart.
-
-
-
Forcefully pull on the flash cover until it is removed.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0