crwdns2915892:0crwdne2915892:0
Power supplies take electricity from a wall socket and convert it so that it may be used by the various components of the PS3.
crwdns2942213:0crwdne2942213:0
-
-
Remove the rubber screw cover near the hard drive cover with a spudger.
-
-
-
Remove the screw holding the top cover in place with a Torx T10 screwdriver.
-
-
-
Slide the top cover down about half an inch.
-
Lift the cover off of the PS3.
-
-
-
-
Remove the seven screws in the top cover with a Phillips #2 screwdriver.
-
-
-
Unplug the white wires connected to the wireless board. There are two sets of wires: one set in the front, one in the back.
-
Remove the two screws on the front of the power supply.
-
-
-
Remove the screws on the back of the power supply with a Phillips #2 screwdriver.
-
-
-
Remove the power supply by lifting it straight up.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0