crwdns2915892:0crwdne2915892:0
The trigger on the Etha doesn't break often, but you may choose to replace it for a trigger you prefer or it may simply need cleaning.
crwdns2942213:0crwdne2942213:0
- 
   
   
- 
                     
            
Use the 5/64" hex key to remove the screw shown.
 - 
                     
            
Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Flip the marker over and use the 5/64" hex key to remove the screw shown.
 - 
                     
            
Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.
 
 - 
                     
            
 - 
                     
                                                
 - 
   
   
- 
                     
            
Carefully remove the 9V battery and connector.
 - 
                     
            
Remove the 9V battery from the connector.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Use a hex key to unscrew the middle screw on the top of the trigger.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Use same hex key to push through trigger retention pin on the side of the gun.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Pull out the trigger by grabbing the bottom and slowly rotating outwards.
 
 - 
                     
            
 
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0