crwdns2915892:0crwdne2915892:0
The motherboard is the key component behind this little speaker. If you're experiencing issues that have persisted through other troubleshooting guides, it may be time to replace the motherboard. The motherboard is a delicate piece of equipment, so work slowly and carefully to avoid damaging the speaker.
crwdns2942213:0crwdne2942213:0
-
-
Remove the suction cup from its groove by twisting and turning it.
-
-
-
Remove the four 8.5 mm screws from the back panel of the speaker by using the Phillips #1 Screwdriver.
-
Remove back panel
-
-
-
Remove the plastic cover in front of the battery slot.
-
Unscrew all the 8.5mm screws that hold the cover to the slot.
-
Separate the battery from the back panel as shown in photograph 3.
-
-
-
Remove the battery from the motherboard.
-
Use a soldering pen to remove the solder connecting the battery wires to the motherboard.
-
-
-
-
Carefully remove the front panel from the device.
-
-
-
Detach the connector clips from the motherboard using the iFixit Opening Tool.
-
Some force may be necessary to remove the plastic clips.
-
-
-
After the speaker is detached, remove the two 8.5mm screws that hold the speaker to the front panel with a Phillips #1 screwdriver.
-
-
-
From the back of the motherboard, unscrew the three phillips head screws holding the motherboard in place.
-
-
-
Pull the rubber away from the edge of the motherboard.
-
-
-
Use the plastic opening tool to remove motherboard from device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
IUPUI, Team 1-4, Harley Spring 2016 crwdns2935289:0IUPUI, Team 1-4, Harley Spring 2016crwdne2935289:0
IUPUI-HARLEY-S16S1G4
crwdns2931471:03crwdne2931471:0
crwdns2935297:04crwdne2935297:0
