crwdns2915892:0crwdne2915892:0
The audio video ports on the DVD player can become unresponsive over time. This guide will show you how to replace the audio video ports on your DVD player.
crwdns2942213:0crwdne2942213:0
-
-
Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
-
Remove the 6.4 mm Phillips #1 screws on each side of the device.
-
-
-
Remove the top plate of the DVD by firmly grasping the player on both sides.
-
Shift the top plate towards the backside of the player.
-
Lift the back half of the top plate up to remove it from the player.
-
-
-
-
Unplug the one ribbon wire and the five bundled cable connectors that are plugged into the motherboard.
-
-
-
Remove the three 4.76 mm #1 Phillips head screws located on the back of the DVD player.
-
-
-
Remove the two 7.94 mm #1 Phillips head screws from the motherboard.
-
-
-
Remove the motherboard from the DVD player.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0