Philips DC320 37 LCD Screen Replacement
crwdns2944107:0crwdnd2944107:0Greg Lanecrwdnd2944107:0crwdnd2944107:0crwdnd2944107:05crwdnd2944107:0crwdne2944107:0
crwdns2944111:0January 28, 2014crwdne2944111:0
crwdns2915892:0crwdne2915892:0
crwdns2942287:0crwdne2942287:0Follow the procedure in this guide to remove and install a broken LCD screen.
crwdns2942213:0crwdne2942213:0
crwdns2943215:0crwdne2943215:0
crwdns2944105:0crwdne2944105:0
-
-
Pry off the four white feet with the pointed end of the spudger
-
-
-
Gently unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.
-
-
-
Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.
-
-
-
Carefully pull up and out the four electrical connectors and two ribbon connectors that connect the bottom panel to the dock.
-
Electrical Connectors
-
Ribbon Connectors
-
-
-
Unscrew the two 6 mm Phillips #00 screws attaching the back panel to device.
-
-
-
Slide the back panel towards top of the device and lift away from the device to detach back panel.
-
-
-
Unscrew the four 16 mm Phillips #2 screws attaching the speaker unit to device.
-
-
-
Slide the speaker towards the bottom of the device to remove.
-
-
-
Unscrew the seven 6 mm Phillips #00 screws holding the grey side piece to the black front panel.
-
Unscrew the two 8 mm Phillips #1 screws that go through the grey piece and the LCD motherboard.
-
-
-
Remove the ribbon cable from the ZIF connector by pulling out the two black tabs with the pointed end of the spudger then pulling the cable straight out of the connector.
-
-
-
Remove the grey side piece from the black front panel by pulling it straight up. It should easily slide off.
-
-
-
Unscrew the six 8 mm Phillips #1 screws holding the LCD screen to the black front panel.
-
Unscrew the two 6 mm Phillips #00 screws from the top of the panel holding the the LCD screen to the front panel.
-
Pull the LCD and circuit board off of the front panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 3-48, Amido Spring 2013 crwdns2935289:0Cal Poly, Team 3-48, Amido Spring 2013crwdne2935289:0
CPSU-AMIDO-S13S3G48
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
