crwdns2915892:0crwdne2915892:0
Change headlamp bulbs on Peugeot Boxer van (2006 onwards).
crwdns2942213:0crwdne2942213:0
-
-
Open the passenger side door to find the bonnet release catch.
-
Pull the catch down and towards you to release the bonnet of the van.
-
-
-
Once the bonnet is loosened, find the yellow handle of the secondary bonnet catch by feeling underneath
-
Once you locate the catch, push the bonnet catch upwards, this will release the bonnet
-
-
-
Use the strut, located to the right of the hood to prop open the bonnet.
-
-
-
-
Remove the two Torx bolts holding the headlamp assembly at each corner.
-
-
-
Gently slide headlamp assembly out
-
-
-
Pull the tab on rubber cap, revealing the back of the headlamp bulb.
-
-
-
Remove the electrical connection from the old bulb (it should just pull off).
-
-
-
With needle-nosed pliers, carefully 'wiggle' the old bulb out from its housing.
-
-
-
Locate your new bulb. Taking care to make sure it is the right way up, push it firmly into place until you feel it clip in.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
