crwdns2915892:0crwdne2915892:0
This guide demonstrates how to remove and replace a Pandigital Super Nova screen in order to preserve the function of the device.
crwdns2942213:0crwdne2942213:0
-
-
Remove the screw covers from each corner of the back side of the device.
-
Set aside.
-
-
-
Using a Philips screwdriver, remove all four .15 mm screws from each corner.
-
Set aside.
-
-
-
Using the plastic opening tool, remove the back cover of the device.
-
-
-
Remove the three .11 mm screws that hold the battery in place.
-
Set aside.
-
-
-
Unplug the battery and remove from device.
-
-
-
-
Use a metal pry tool to separate the camera and the small clip that holds it in place.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use a pair of small tweezers to gently pull the camera connector out of the motherboard.
-
-
-
Use a screwdriver to remove the six .15 mm screws that hold the motherboard in place. Set aside.
-
-
-
Remove the eleven screws that hold the screen to the base. Eight are .15 mm and three are .11 mm.
-
-
-
Remove the motherboard from the tablet using a nylon spudger.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use tweezers to carefully remove the connector between the screen to the tablet.
-
-
-
Use a pry tool to carefully separate the motherboard from the hard casing.
-
-
-
Lift the motherboard out of the tablet.
-
Remove the second connector between the screen and the motherboard.
-
-
-
Pry the silver screen box from away from the device.
-
Open each of the four clips securing the screen box to open it.
-
-
-
Lift the screen out of its protective box.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0