crwdns2915892:0crwdne2915892:0
Be sure to remove the battery and SD card before opening the camera to get to the screen component.
crwdns2942213:0crwdne2942213:0
-
-
Open and rotate the screen, then remove the screw(3.5mm Philips) indicated with a screwdriver.
-
Then, rotate the screen 180 degrees and remove the screw on the opposite side.
-
-
-
Remove the screw(2.6mm Philips) indicated on the top of the screen with the screwdriver. Then remove the corresponding screw on the bottom of the screen.
-
-
-
Pull the backing away from the screen as shown in the photo.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Unplug the black connector between the camera and the screen by pulling down.
-
For increased ease, use tweezers or forceps, as seen in the picture
-
-
-
Pull the screen away from the camera the same way that you removed the screen backing.
-
-
-
Use the screwdriver to remove the screw(2.46mm Philips) indicated.
-
-
-
Pull upwards on the screen border to remove it from the actual screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
I need the LCD screen, can you helpme?