crwdns2915892:0crwdne2915892:0
The most common part that can tear down and rip, and is easy to repair
crwdns2942213:0crwdne2942213:0
-
-
Make sure the machine is not under power and
-
remove the inner container
-
-
-
Remove the screw on the left side of the hinge of the lid (whith a philips 1 screwdrive)
-
After the screw is removed, you can move the lid (in open position) to the other side and slide it off the hinge (removing the lid completely)
-
-
-
Turn the complete machine upside down
-
Remove the four (PH1) screws from the four rubber stands.
-
-
-
-
Remove the two normal screws from the shorter sides (normal PH1 screws)
-
-
-
Remove the two torx screws from the longer sides (T20 S2)
-
-
-
When all screws are removed from the bottom side, the metal cover can be simply lifted up, and the motor is visible
-
-
-
With the help of the 8 mm wrench, remove the bolt from the black plastic gear wheel
-
lift the black gear wheel up and the belt drive can be replaced
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0