crwdns2915892:0crwdne2915892:0
Follow this guide to access and remove the antenna of the cell phone.
crwdns2942213:0crwdne2942213:0
-
-
Press the button located just above the Sprint™ logo and then slide the cover down.
-
-
-
Use the small notch on the left hand side of the phone to remove the battery.
-
-
-
Remove the stylus from the phone.
-
-
-
-
After removing the battery and stylus, unscrew the 5 Torx screws using a T-5 Torx screw driver.
-
-
-
Using the spudger, remove the small rubberized patch under the antenna.
-
-
-
Unscrew the last two screws using the same T-5 Torx screw driver.
-
-
-
Using the plastic opening tool, carefully pry open the back case to loosen the antenna.
-
-
-
The antenna will now be loose, gently pull the antenna out of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.