crwdns2915892:0crwdne2915892:0
This blender is a staple of a majority of common households. It consists of a motherboard and motor that allows the blender to work. For this repair guide, our main focus is to disassemble the motor from the rest of the blender.
crwdns2942213:0crwdne2942213:0
-
-
Take the blender and place the top, cup, and blades aside
-
-
-
Flip over the base containing the motor of the blender
-
Use the Phillips Head Screwdriver to remove the 4 screws as pictured
-
-
-
Use an 11mm screwdriver to remove the screw from the fan blade
-
Remove the fan blade
-
-
-
-
Locate the washer beneath the fan and remove it from the motor
-
-
-
Use a 6.5mm wrench and extender to remove the 2 screws holding the top of the motor in place
-
-
-
Take out the motor and copper wires from the blender
-
-
-
Disconnect the 2 white wires that connect the motor to the motherboard
-
-
-
Remove the 4 bolts connecting the motor to the blender wall using a socket wrench
-
-
-
Flip the blender back over to the original position and remove the metal disk located at the top of the blender using pliers
-
-
-
Fully remove the motor from the blender
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Group 2 ENGR communications project crwdns2935289:0Group 2 ENGR communications projectcrwdne2935289:0
Community
crwdns2931471:04crwdne2931471:0
crwdns2935297:02crwdne2935297:0
