crwdns2915892:0crwdne2915892:0
Use this guide to replace your old or damaged Drinking Lid Seal.
crwdns2942213:0crwdne2942213:0
-
-
Grip the blender base with one hand and blender bottle with the other hand.
-
Rotate the blender bottle a quarter turn counterclockwise .
-
Lift the blender bottle out of the blender base. The blade assembly should still be attached to the blender bottle.
-
-
-
Grip the blade assembly with one hand and blender bottle with the other hand.
-
Rotate the blade assembly counterclockwise until it is completely unscrewed from the blender bottle.
-
Lift the blender bottle to separate it from the blade assembly.
-
-
-
After removing the blade assembly from the blender bottle, ensure that your drinking lid assembly has its seal placed in the seal bed.
-
-
-
-
Grab the blender bottle with one hand and the drinking lid assembly with the other.
-
Place the drinking lid assembly onto the blender bottle and twist it clockwise until it is tight around the blender bottle.
-
-
-
After separating the drinking lid assembly from the blender bottle, position the plastic opening tool on either side of the seal in the drinking lid assembly.
-
Wedge the tool between seal and seal seat wall.
-
-
-
Gently pry the seal up while lifting seal out of the seal seat.
-
-
-
Press new seal into seal seat with finger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0