crwdns2942213:0crwdne2942213:0
-
-
Remove two 2mm TR9 Torx screws from the bottoms of the device.
-
-
-
There is a border between the black phone backing and the silver screen.
-
Place the Jimmy in this border, and cautiously torque it back and forth to part the two halves.
-
When the halves are parted correctly, the gap should look like this.
-
-
crwdns2935267:0crwdne2935267:0Anti-Static Wrist Strap$7.95
-
On the upper right side, there is a black ribbon cable in the shape of an “L”. Remove the single 1 mm Phillips #000 screw on the left side of the ribbon cable.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$3.99
-
Use a pair of angled tweezers to carefully remove the metal casing of the ribbon cable.
-
Use a pair of angled tweezers to detach the black ribbon cable. This is done to unplug the battery.
-
-
-
There is a black flap on the bottom of the battery.
-
Using your fingers, pinch this flap and carefully pull the battery up and out of the phone.
-
-
crwdns2935267:0crwdne2935267:0Anti-Static Wrist Strap$7.95
-
Remove the anti-static wrist strap.
-
Use the Phillips #000 screwdriver to remove the five black 2 mm screws.
-
Use the Phillips #000 screwdriver to remove the two grey 2 mm screws.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$3.99
-
Use a pair of angled tweezers to remove the speaker housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Embry-Riddle Aeronautical University, Team S20-G1, Branham Fall 2019 crwdns2935289:0Embry-Riddle Aeronautical University, Team S20-G1, Branham Fall 2019crwdne2935289:0
ERAU-BRANHAM-F19S20G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
