crwdns2915892:0crwdne2915892:0
Use this guide to replace the motherboard on an Optoma HD72 projector.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips screwdriver to remove the five 2 mm screws on the underside of the device.
-
-
-
Flip the device over and slightly lift the upper case, with care not to strain the two cables.
-
Disconnect the two cables that connect the top case to the motherboard.
-
Lift the upper case up and off.
-
-
-
-
Disconnect all of the cables that are connected to the motherboard.
-
-
-
Remove the four 2 mm Phillips screws that secure the motherboard.
-
Lift the motherboard up and out of the chassis.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.