crwdns2915892:0crwdne2915892:0
Is your OnePlus Nord N20 5G (Model Number - CPH2459) screen damaged or malfunctioning? This guide will help you with a screen replacement.
crwdns2942213:0crwdne2942213:0
-
-
Insert the SIM ejection tool or a spudger in the small hole next to the SIM tray.
-
Push it gently until the tray pops out.
-
Remove the SIM card tray by sliding it outwards.
-
-
-
Heat the iOpener in a microwave for about 30 seconds. If the iOpener isn’t hot enough, reheat it for another 10-30 seconds.
-
Apply the heated iOpener on the backside of the phone for a minute to loosen the adhesive.
-
Use the iFixit opening tool and slide it along the edges of the phone to pry the back panel off.
-
-
-
Remove the 18 3.9 mm screws using a Phillips #0 screwdriver.
-
-
-
Take the iFixit opening tool and run it along the edges.
-
Separate the back housing from the frame of the screen.
-
-
-
-
Disconnect the brackets attached to the motherboard using a spudger.
-
-
-
Disconnect the bracket attached to the daughterboard using a spudger.
-
-
-
Heat up an iOpener for 30 seconds.
-
Place it on the front of the screen until you are able to slide a Jimmy in between the screen and the phone.
-
-
-
Attach a suction handle to the screen.
-
-
-
Use a suction tool to pull the screen while prying the screen with a Jimmy.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 4-5, Harold Fall 2024 crwdns2935289:0University of North Texas, Team 4-5, Harold Fall 2024crwdne2935289:0
UNT-HAROLD-F24S4G5
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
