crwdns2915892:0crwdne2915892:0
In this guide, we will walk through the steps necessary to replacing the congestion-sensing antenna.
crwdns2942213:0crwdne2942213:0
-
-
While holding the base firmly using the palm of one hand, remove the cowl (cover) by turning the cowl counterclockwise until a snap is heard. Once disengaged, pull upwards.
-
-
-
Place the plastic opening tool under the speaker grille, and just above the light ring.
-
Move the plastic opening tool around the groove while applying upward force to pry loose the 4 clips holding the grille in place.
-
-
-
-
Using a metal spudger, carefully remove the congestion-sensor antenna by undoing the two clips.
-
-
-
Remove the wire connection to the antenna by soldering it off.
-
For help with soldering and de-soldering check out the iFixit Soldering Guide
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0