crwdns2915892:0crwdne2915892:0
When using the metal spudger to remove the battery, be sure to carefully pry along the entire side the battery so that the battery will come off without bending.
crwdns2942213:0crwdne2942213:0
-
-
Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface
-
-
-
Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.
-
-
-
-
Use a magnet to remove the screws after unscrewing them and place them aside.
-
-
-
Carefully remove the back cover without breaking the battery wire.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.
-
-
-
Use the metal spudger to carefully pry along the entire side of the battery from its connecting tape on the back cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 2-2, Sullivan Spring 2016 crwdns2935289:0USF Tampa, Team 2-2, Sullivan Spring 2016crwdne2935289:0
USFT-SULLIVAN-S16S2G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:02crwdne2935297:0
crwdns2947410:01crwdne2947410:0
What battery is required for this though? Is it easily found on amazon?
