crwdns2937539:0crwdnd2937539:0crwdne2937539:0
crwdns2915892:0crwdne2915892:0
This guide will show you how to remove the camera's power button so you can replace it if it is not working.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.
-
-
-
Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.
-
-
-
Use the plastic opening tools and your fingers to pry the front plate from the camera.
-
-
-
-
Use your fingers to pry open the back cover.
-
-
-
Remove the silver panel from the top of the camera.
-
-
-
Flip the silver panel over. The power button is the smaller button covered by a metal backing.
-
-
-
Pull the metal backing away from the silver panel.
-
-
-
Push the power button down and out of the silver panel with your finger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0