crwdns2894164:0crwdne2894164:0

crwdns2890822:0crwdne2890822:0

crwdns2890844:0crwdne2890844:0

crwdns2861143:0crwdne2861143:0

crwdns2892376:0crwdne2892376:0

This guide will show you how to remove the camera's power button so you can replace it if it is not working.

crwdns2860947:0crwdne2860947:0

crwdns2890040:0crwdne2890040:0

  1. Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver. Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.
    • Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.

  2. Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.
    • Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.

  3. Use the plastic opening tools and your fingers to pry the front plate from the camera. You might need to open the battery cover to remove the front plate. You might need to open the battery cover to remove the front plate.
    • Use the plastic opening tools and your fingers to pry the front plate from the camera.

    • You might need to open the battery cover to remove the front plate.

  4. Use your fingers to pry open the back cover. When you remove the back of the camera, the button membrane might fall out. Don’t lose this sheet.
    • Use your fingers to pry open the back cover.

    • When you remove the back of the camera, the button membrane might fall out. Don’t lose this sheet.

    • The LCD screen is connected to the body of the camera by an orange ribbon cable. Don’t pull this ribbon cable out.

  5. Remove the silver panel from the top of the camera. Remove the silver panel from the top of the camera.
    • Remove the silver panel from the top of the camera.

  6. Flip the silver panel over. The power button is the smaller button covered by a metal backing.
    • Flip the silver panel over. The power button is the smaller button covered by a metal backing.

  7. Pull the metal backing away from the silver panel.
    • Pull the metal backing away from the silver panel.

  8. Push the power button down and out of the silver panel with your finger.
    • Push the power button down and out of the silver panel with your finger.

crwdns2892372:0crwdne2892372:0

To reassemble your device, follow these instructions in reverse order.

crwdns2878426:02crwdne2878426:0

Adri

crwdns2886885:023/02/2015crwdne2886885:0

447 crwdns2894548:0crwdne2894548:0

crwdns2886889:03crwdne2886889:0

crwdns2892814:0crwdne2892814:0

USF Tampa, Team 1-3, Leahy Winter 2015 crwdns2886886:0USF Tampa, Team 1-3, Leahy Winter 2015crwdne2886886:0

USFT-LEAHY-W15S1G3

crwdns2858115:03crwdne2858115:0

crwdns2886889:010crwdne2886889:0

crwdns2892924:00crwdne2892924:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 0

crwdns2894768:07crwdne2894768:0 3

crwdns2894768:030crwdne2894768:0 6

crwdns2894770:0crwdne2894770:0 1,027