crwdns2942213:0crwdne2942213:0
-
-
Start with the phone in the flipped open position.
-
You must remove the sticker in the center, below the screen to reveal the center screw.
-
Use a T5 screwdriver to remove all three screws, loosening the front screen.
-
-
-
Flip the phone to the closed position and turn to the front screen.
-
The front cover will now be loose enough for you to remove by grabbing the edges and lightly pulling the cover off.
-
-
-
With the front cover off, the screen and keypad should be loose.
-
-
-
-
Using a plastic opening tool pry up the cable connecting the LCD screen to the rest of the phone.
-
With the cable disconnected, the screen should be free for removal or replacement.
-
-
-
After removing the front screen and front keypad, your device should look like this.
-
-
-
Using the T5 Screwdriver, remove the two screws shown.
-
-
-
Make sure to remove the connection shown by gently easing the plastic opening tool underneath the connection and lightly prying the connection apart.
-
-
-
Gently, lift the board up to reveal the front screen.
-
-
-
Using the plastic opening tool, lift and remove the inside screen.
-
In order to install a new screen, simply follow the steps in reverse order with the new screen.
In order to install a new screen, simply follow the steps in reverse order with the new screen.
crwdns2935221:0crwdne2935221:0
crwdns2935229:05crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 18-21, Garner Spring 2011 crwdns2935289:0Cal Poly, Team 18-21, Garner Spring 2011crwdne2935289:0
CPSU-GARNER-S11S18G21
crwdns2931471:03crwdne2931471:0
crwdns2935297:08crwdne2935297:0
