crwdns2915892:0crwdne2915892:0
If you have to replace the logic board than use this installation instruction for the logic board.
crwdns2942213:0crwdne2942213:0
-
-
Remove the back cover of your cell phone by pushing the small slider with your fingernail towards the top of the phone.
-
Lift off your cell phone's back cover.
-
-
-
Use your index finger to first push down and then lift up the battery as shown.
-
Remove the battery from your cell phone.
-
-
-
Open the front cover of your cell phone with the plastic opening tool or finger nail.
-
Lift the cover upwards, starting from the bottom below the keypad.
-
-
-
-
Lift the keypad off of the keyboard as it is not attached to the phone anymore.
-
-
-
Remove six Torx 6 screws with the screwdriver.
-
-
-
Remove the frame that holds the keyboard and the display.
-
-
-
Lift the logic board of out the rear case of the phone.
-
-
-
This is the logic board of your cell phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.