crwdns2915892:0crwdne2915892:0
Follow this guide to remove the rear panel from a Nintendo Switch.
A single screw is hidden underneath the kickstand.
crwdns2942213:0crwdne2942213:0
-
-
Remove the four 6.3 mm Tri-point Y00 screws from the rear panel.
-
-
-
Remove the single 6.1 mm Phillips #000 screw from underneath the kickstand.
-
-
-
-
Remove the two 2.7 mm Phillips #000 screws from the bottom of the device.
-
-
-
Remove the single 2.7 mm Phillips #000 screw from the top of the device.
-
-
-
Remove the single 3.8 mm Phillips #000 screw from the right Joy-Con rail.
-
Remove the single 3.8 mm Phillips #000 screw from the left Joy-Con rail.
-
-
-
Pull the rear panel up and off of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.