crwdns2915892:0crwdne2915892:0
Follow this guide to replace the motherboard in a Nintendo Switch video game console.
crwdns2942213:0crwdne2942213:0
-
-
Disconnect the right loudspeaker from the motherboard.
-
-
-
Disconnect the left speaker from the motherboard.
-
-
-
Use a spudger to flip up the small beige locking flap on the display ZIF connector.
-
-
-
Use the pointed end of a spudger to slide the display ribbon cable out of the ZIF connector.
-
-
-
Use a spudger to flip up the small black locking flap on the power/volume button ZIF connector.
-
-
-
-
Use a spudger to flip up the small gray locking flap on the fan ZIF connector.
-
-
-
Use the flat end of a spudger to disconnect the white coaxial antenna cable from the motherboard.
-
-
-
Use the flat end of a spudger to disconnect the black coaxial antenna cable from the motherboard.
-
-
-
Use a spudger to flip up the small gray locking flap on the right Joy-Con rail ZIF connector.
-
-
-
Use a spudger to flip up the small black locking flap on the ZIF connector.
-
-
-
Use a spudger to flip up the small gray locking flap on the left Joy-Con rail ZIF connector.
-
-
-
Remove the four 2.50 mm JIS #000 screws from the motherboard.
-
Remove the two 3.14 mm JIS #000 screws from the USB-C port.
-
-
-
Gently lift and wiggle the motherboard to remove.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
