crwdns2894164:0crwdne2894164:0

crwdns2890822:0crwdne2890822:0

crwdns2890844:0crwdne2890844:0

crwdns2861143:0crwdne2861143:0

crwdns2892376:0crwdne2892376:0

This will work as a prerequisite guide for all other guides. This helps us break down the device into the main base layer.

crwdns2860947:0crwdne2860947:0

crwdns2890040:0crwdne2890040:0

  1. Remove the five screws (13mm long, 6mm head) attaching the Base Cover using a Phillips screwdriver (Ph2). Remove the two screws (13 mm long, 6mm head) attaching the Base Cover using a T10 screwdriver.
    • Remove the five screws (13mm long, 6mm head) attaching the Base Cover using a Phillips screwdriver (Ph2).

    • Remove the two screws (13 mm long, 6mm head) attaching the Base Cover using a T10 screwdriver.

  2. Carefully remove the second layer from the base. You will not need a screwdriver for this step.
    • Carefully remove the second layer from the base. You will not need a screwdriver for this step.

  3. Remove the 2 screws (13mm, 6mm head) connected to the plastic piece holding down the power cord. Then remove the additional 4 screws (13mm, 6mm head) and 2 screws (11mm, 5mm head) securing the base. Carefully lift the base up from the rest of the blender.
    • Remove the 2 screws (13mm, 6mm head) connected to the plastic piece holding down the power cord.

    • Then remove the additional 4 screws (13mm, 6mm head) and 2 screws (11mm, 5mm head) securing the base.

    • Carefully lift the base up from the rest of the blender.

  4. Remove 4 screws (11mm, 4mm head) connecting the circuit board to the base.
    • Remove 4 screws (11mm, 4mm head) connecting the circuit board to the base.

crwdns2892372:0crwdne2892372:0

To reassemble your device, follow these instructions in reverse order.

Tommee Walker

crwdns2886885:022/08/2017crwdne2886885:0

691 crwdns2894548:0crwdne2894548:0

crwdns2886889:06crwdne2886889:0

crwdns2892814:0crwdne2892814:0

Arkansas State University, Team S1-G4, Chamberlain Fall 2017 crwdns2886886:0Arkansas State University, Team S1-G4, Chamberlain Fall 2017crwdne2886886:0

ARSU-CHAMBERLAIN-F17S1G4

crwdns2858115:02crwdne2858115:0

crwdns2886889:06crwdne2886889:0

crwdns2892922:0crwdne2892922:0

Hey Tommee where can I get a circuit board for the ninja bl 773.

Bhesham Sochan - crwdns2853112:0crwdne2853112:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 2

crwdns2894768:07crwdne2894768:0 6

crwdns2894768:030crwdne2894768:0 20

crwdns2894770:0crwdne2894770:0 536