crwdns2915892:0crwdne2915892:0
If the motor in your Ninja Foodi SP101 is malfunctioning, it may be difficult for your food to reach desired temperatures. Follow this guide to quickly replace your Ninja Foodi SP101 motor.
crwdns2942213:0crwdne2942213:0
-
-
Use a TR10 screwdriver to remove the four 11mm screws holding the black lever bar in place.
-
-
-
Use a Phillips #1 screwdriver to remove the three 8mm screws on each side of the back panel.
-
-
-
-
Flip the device upside down and open the bottom panel.
-
Remove the 3 x philips #1 screws along the top edge of the interior using a screwdriver. The Bottom 2 do not have to be removed.
-
-
-
Remove the control side panel. To remove it, push forward towards then front control panel to release the tabs out of the main body. Fold away the side panel when the tabs have visually released from their slots in the main body.
-
-
-
Lift the handle and pull the side panel out.
-
Remove the handle side panel.
-
-
-
Open the bottom door.
-
Remove the five 8 mm screws located on the control panel side using a Phillips #1 screwdriver.
-
-
-
Remove the four 1 mm screws with a Phillips #1 screwdriver.
-
Remove the motor from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Utah Tech University, Team 1-4, McMurrin Spring 2024 crwdns2935289:0Utah Tech University, Team 1-4, McMurrin Spring 2024crwdne2935289:0
UTAHTECH-MCMURRIN-S24S1G4
crwdns2931471:02crwdne2931471:0
crwdns2935297:09crwdne2935297:0
