crwdns2915892:0crwdne2915892:0
Replacing the board holding the GPS, DC in and AV out connectors.
Remplacement de la carte electronique comportant le connecteur GPS, DC IN, et AV out.
crwdns2942213:0crwdne2942213:0
-
-
Remove the three screw in red
-
Remove the three long screw in orange
-
Remove the screw in yellow
-
-
-
Remove the 4 screw in green
-
Remove the 2 screw in yellow
-
-
-
Slacken the grip side of the cover first
-
Remove the cover wholly.
-
-
-
Disconnect the FPC of the back cover
-
Remove the grip cover by rotating
-
-
-
-
Toggle up the black plate and disconnect the flex cable
-
Toggle up the white plate and disconnect the flex cable
-
Push up the right slide of the connector to free it
-
-
-
Push up the bottom of the connector to free it
-
-
-
Remove the six screws to free the protection plate
-
Disconnect the white cables
-
Disconnect the microphone Cable
-
-
-
Disconnect the speaker cable
-
Remove the two screws to free the PCB
-
Toggle th PCB from Left to Right
-
-
-
Disconnect the black cables
-
-
-
Remove the two screws
-
Unsolder the 3 Wires ( Red, Black, Orange )
-
Pour réassembler votre appareil, suivez les instructions dans l'ordre inverse.
Pour réassembler votre appareil, suivez les instructions dans l'ordre inverse.