crwdns2915892:0crwdne2915892:0
If you get some CHA - errors on your Camera, it is likely time to replace the CF slot. The part number of the Nikon D70 CF slot is 1F998-181.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 4.8 mm Phillips screws securing the battery side of the rear cover to the D70.
-
-
-
Remove the two 4.8 mm Phillips screws securing the port side of the rear cover to the D70.
-
-
-
Use your fingernail to flip up the ZIF locking flap on the LCD ribbon cable socket.
-
Pull the LCD board ribbon cable out of its socket.
-
-
-
Carefully pull the sides of the rear cover away from the body of the D70.
-
-
-
-
Pull the rear cover off the body of the D70, minding the LCD board ribbon cable that may get caught.
-
-
-
Remove the two Phillips screws securing the holder of the CF Card Slot.
-
-
-
Peel of the Foil securing the Flexcable.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use Tweezers to open the locking on the ribbon cable socket.
-
-
-
Pull the ribbon cable out of its socket.
-
-
-
Carefully fold the Pull the ribbon cable towards the CF Slot
-
-
-
Remove the two Phillips screws to separate the Holder from the Slot.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:024crwdne2935229:0
crwdns2947412:06crwdne2947412:0
Mine has a pin broken off. Where do I get a replacement?
Hello,
Thanks to your help, I was able to replace it easily.
Many Thanks from France
How do i change out the board with the pins…… second hand cam someone bent alot of pins
I can order board or can i order the whole cf ?
You can find them on ebay real easy. both full assemblies and just the board with the pins