crwdns2915892:0crwdne2915892:0
The shutter button seems to malfunction whether it is not turning or not working. This guide will help you understand the problem.
crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Remove 8-2.46 mm screws from both sides and bottom of camera using a #000 Phillips screwdriver. 
- 
                     
            Remove 2 screws from left side. (picture 1) 
- 
                     
            Remove 4 screws from bottom. (picture 2) 
- 
                     
            Remove 2 screws from right side. (picture 3) 
 
- 
                     
            
- 
   
   - 
                     
            Remove black cover pulling up with left thumb. Hold silver cover with right thumb. 
- 
                     
            Remove silver cover lifting up with left thumb. Hold the camera with right thumb. 
 
- 
                     
            
- 
   
   - 
                     
            Remove 2-2.10mm screws in the front of the camera using a #000 Phillips screwdriver. 
- 
                     
            Remove the two screws. 
- 
                     
            Gently pull up to detach the frame. (picture 2) 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Turn and hold the shutter bottom to the left and using a tweezer carefully remove the spring. 
 
- 
                     
            
- 
   
   - 
                     
            Gently remove the black adhesive tape. 
 
- 
                     
            
- 
   
   - 
                     
            Remove 2-2.90mm using a #000 Phillips screwdriver. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
