crwdns2915892:0crwdne2915892:0
Do you think your motherboard is fried? This guide can help you walk through the removal of this motherboard for the Nikon Coolpix 775.
crwdns2942213:0crwdne2942213:0
-
-
Flip the camera, so the bottom is facing up.
-
-
-
Slide the gray latch to the open "pac-man" symbol.
-
-
-
Flip up the cover and remove the battery inside the slot.
-
-
-
Unscrew the eight 4mm long JIS #00 screws from the bottom, right side, and the left side.
-
-
-
-
Grab the camera with both your hand from the front and the back.
-
Pull the two parts apart.
-
-
-
Flip the camera back so you can see the top.
-
Pull the ribbon cable out of the socket connecting to the motherboard by using your hands or tweezers.
-
-
-
Look back to the top of the camera.
-
Flip up the tab that is exposed right by the dial using tweezers.
-
Release the ribbon to be able to separate the top part of the back of the camera.
-
-
-
Look at the top side of the camera.
-
Unscrew the two 4mm Phillips #00 screws.
-
Unscrew the 2mm JIS #00 screw as well.
-
-
-
Push or slide the the top dial toward the backside of the camera to unclip from the motherboard.
-
-
-
Pull the red and black wire out of the socket on the motherboard.
-
Pull motherboard up out of camera.
-
-
-
Pull the ribbon connected to the dial off the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
IUPUI, Team S2-G3, Baechle Fall 2018 crwdns2935289:0IUPUI, Team S2-G3, Baechle Fall 2018crwdne2935289:0
IUPUI-BAECHLE-F18S2G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:06crwdne2935297:0
