crwdns2915892:0crwdne2915892:0
This guide will walk you through how to remove the back case of the Nikon Coolpix 5400. The processes only requires a handful of screws to be removed and a few connecting wires. When removing the wire connectors, be careful not to break the plastic fittings.
crwdns2942213:0crwdne2942213:0
-
-
Remove one 3.0mm Phillips #0 screw from the top of the case.
-
-
-
Remove two 3.0mm Phillips #0 screws from the card reader side of the case.
-
-
-
Remove four 3.0mm Phillips #0 screws from the bottom of the camera.
-
-
-
Remove one 3.0mm Phillips #0 screw from the side of the camera.
-
-
-
-
Use a plastic opening tool to gently remove the back case from the rest of the camera.
-
-
-
Pull the back of the camera cover apart.
-
-
-
Remove the two 4.0mm Phillips #0 screws holding the circuit board to the back case.
-
-
-
Pull the LCD screen cables in the direction that the wires are exiting the circuit board.
-
-
-
Pull the toggle wheel wire connector up and away from the top of the camera.
-
Pull the button control panel wire connector up and away from the top of the camera.
-
-
-
Remove the six 3.0mm Phillips #0 screws holding the button control panel.
-
Remove the back cover from the camera body.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Oregon Institute of Technology, Team S1-G4, Lancaster Spring 2019 crwdns2935289:0Oregon Institute of Technology, Team S1-G4, Lancaster Spring 2019crwdne2935289:0
OIT-LANCASTER-S19S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
