crwdns2942213:0crwdne2942213:0
-
-
With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.
-
-
-
Remove the chrome side cover from the body of the camera.
-
-
-
Remove the four 3.2 mm screws on the bottom of the camera.
-
-
-
Remove the two 3.2 mm screws from the right side of the camera (with lens is facing forward)
-
Remove the one 3.2 mm screw from the left side of the camera (with lens facing foward)
-
-
-
Gently separate the back cover from the body of the camera.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use the tweezers to disconnect the ribbon from the circuit board.
-
-
-
-
Remove the one 2.6 mm screw from the left side of the camera (with the lens facing forward)
-
-
-
Gently separate the front cover from the body of the camera.
-
-
-
Remove the two 3.2 mm screws that hold the flash to the front cover.
-
-
-
Use the Spudger to remove the copper colored light bulb clip.
-
Remove the front cover entierly from the camera body.
-
-
-
From the top view of the camera, remove the one 5.8 mm screw.
-
From the top view of the camera, remove the one 2.8 mm screw
-
-
-
Remove the three 3.4 mm screws from the back side of the camera.
-
-
-
Remove the two 3.4 mm screws from the side of the camera.
-
-
-
Separate the two metal body pieces from the rest of the camera.
-
-
-
Gently remove the two ribbons connecting the lens to the mother board.
-
-
-
Gently separate the camera lens from the mother board.
-
-
-
The mother board is permanently fixed to the battery housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Cuesta, Team 1-6, Zipperian Fall 2011 crwdns2935289:0Cuesta, Team 1-6, Zipperian Fall 2011crwdne2935289:0
CUESTA-ZIPPERIAN-F11S1G6
crwdns2931471:02crwdne2931471:0
crwdns2935297:06crwdne2935297:0
