crwdns2915892:0crwdne2915892:0
Internal prereq..
crwdns2942213:0crwdne2942213:0
-
-
Remove the six Phillips screws securing the rear inner frame to the inner case.
-
-
-
Insert the flat edge of a plastic opening tool in between the rear inner frame and the top left corner of the Nexus S.
-
Pry the opening tool upwards to pop the top right corner from the clips securing it to the inner assembly.
-
-
-
-
Insert the plastic opening tool to the right of the power button.
-
Slide the plastic opening tool downwards along the perimeter of the Nexus S to release the clips on the right side.
-
-
-
In the same manner as previously described, release the bottom clips located near the bottom of the Nexus S.
-
-
-
Insert and pry the plastic opening tool to release the final clip securing the rear inner frame to the inner assembly.
-
-
-
Lift and remove the rear inner frame from the Nexus S.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
