crwdns2915892:0crwdne2915892:0
This is a guide on how to replace the controller sticks from inside the NexiGo NS32. There are 8 specific steps in this guide that describe how to take the controller sticks out of the controller. Be careful not to damage any of the internal components.
crwdns2942213:0crwdne2942213:0
-
-
Orient the controller so that it is face down.
-
-
-
Remove the eight 9 mm Phillips screws that secure the rear case.
-
-
-
-
Grip the white battery connector and pull it directly out of its motherboard socket.
-
-
-
Remove the three 9 mm Phillips screws that secure the joystick PCB.
-
-
-
Flip up the black ZIF connector locking flap on the left side of the joystick PCB.
-
Pull the ribbon cable directly out of its socket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.