crwdns2915892:0crwdne2915892:0
If your robot is passing over surfaces and not collecting debris, by cleaning or replacing the brushes could help.
Here are step by step instructions in how to get to the brushes.
crwdns2942213:0crwdne2942213:0
-
-
Place the vacuum on its back so the brushes are visible.
-
-
-
Remove the four 10 mm screws with a Torx T10 screwdriver.
-
-
-
-
Remove the rotary brush simply by grabbing it firmly and pulling it off.
-
Once you have removed your rotary brush and 4 bolts, you can easy remove the brush guard.
-
-
-
Remove the brush by simply pulling it out.
-
From there you can clean it or replace the brush with a new one.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Sam Houston State, Team S17-G6, Blackburne Spring 2018 crwdns2935289:0Sam Houston State, Team S17-G6, Blackburne Spring 2018crwdne2935289:0
SHSU-BLACKBURNE-S18S17G6
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
