crwdns2915892:0crwdne2915892:0
If you determine that your tire is flat due to a ruptured or damaged inner tube this guide will help you replace the inner tube.
crwdns2942213:0crwdne2942213:0
-
-
Flip the bicycle upside down so that the bicycle rests on the seat and handlebars. The bike should be able to stay standing on its own.
crwdns2952109:0crwdne2952109:0
-
-
-
Using a 15mm wrech, loosen the axial nut.
-
-
-
Pull the chain slack and remove the tire.
-
-
-
-
Insert the flat side of the tire lever between the inside edge of the rim and the seal of the tire.
-
Clip the tire lever to the nearest spoke.
-
-
-
Insert the second tire lever next to first and slowly slide it along the outside edge of the rim until one side of the tire is off the rim.
-
-
-
Re-insert the first tire lever to hook the opposite seam of the tire and repeat steps 3 through 5.
-
-
-
Remove the cap from the inner tube, and pull the valve stem out of the rim.
-
To install new inner tube, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0
crwdns2935287:0crwdne2935287:0
Cal Poly, Team 1-40, Maness Winter 2014 crwdns2935289:0Cal Poly, Team 1-40, Maness Winter 2014crwdne2935289:0
CPSU-MANESS-W14S1G40
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2947410:01crwdne2947410:0
Replace also means how to put it back together!
ellik - crwdns2934203:0crwdne2934203:0 crwdns2950251:0crwdne2950251:0
