crwdns2915892:0crwdne2915892:0
This guide details the process of removing the camera from an Motorola Triumph. Installation of the camera can be accomplished by reversing the process.
crwdns2942213:0crwdne2942213:0
-
-
Slide the back cover down.
-
Lift the back cover up.
-
Pry the battery out with the spudger
-
-
-
Gently pry out the battery using the spudger
-
-
-
After removing the Battery remove the two screws with a T4 screwdriver.
-
-
-
-
With the spudger, go around the seam of the phone and pry away the back chassis.
-
-
-
Using the T5 screwdriver, remove all the four screws shown in the picture.
-
-
-
Lift up the motherboard out of the device,
-
-
-
Pry the speakers out using the plastic spudger.
-
-
-
Locate the camera at the top of the motherboard.
-
-
-
Use the the spudger to unclip the connector above the camera.
-
Remove the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.