crwdns2915892:0crwdne2915892:0
Click here for an updated version of this guide. The version you are viewing is retained for historical purposes.
In this guide, we will walk through how to remove the front screen of the Motorola Moto G3
crwdns2942213:0crwdne2942213:0
-
-
Use the plastic opening tool to open the back cover as shown in the photo.
-
-
-
Heat an iOpener in the microwave for 30 seconds.
-
Place the heated iOpener on all four edges of the screen for approximately 2 minutes.
-
-
-
-
Apply the plastic opening tool on the edge of the screen near the front camera.
-
After creating enough space, allow the opening tool to be inserted on the side of the phone.
-
Create another space on the other side of the screen.
-
Leave the opening tool inserted.
-
Carefully apply the larger plastic opening tool by sliding it through the longer edge of the screen.
-
-
-
A strip will be attached to the motherboard as shown.
-
Using tweezers, carefully detach the strip from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Baylor, Team S5-G3, Williams Spring 2018 crwdns2935289:0Baylor, Team S5-G3, Williams Spring 2018crwdne2935289:0
BU-WILLIAMS-S18S5G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:09crwdne2935297:0
