crwdns2915892:0crwdne2915892:0
Click here for an updated version of this guide. The version you are viewing is retained for historical purposes.
crwdns2942213:0crwdne2942213:0
-
-
Use the plastic opening tool to open the back cover as shown in the photo.
-
-
-
Heat an iOpener in the microwave for 30 seconds.
-
Place the heated iOpener on all four edges of the screen for approximately 2 minutes.
-
-
-
Apply the plastic opening tool on the edge of the screen near the front camera.
-
After creating enough space, allow the opening tool to be inserted on the side of the phone.
-
Create another space on the other side of the screen.
-
Leave the opening tool inserted.
-
Carefully apply the larger plastic opening tool by sliding it through the longer edge of the screen.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
A strip will be attached to the motherboard as shown.
-
Using tweezers, carefully detach the strip from the motherboard.
-
-
-
With a T4 screwdriver, remove the10 "yellow" 2mm screws and 4 "black" 2mm screws.
-
-
-
Use the metal spudger and lift the back cover on the bottom side of the phone (this is attached to the motherboard).
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using tweezers, pry open the black front camera cover and remove it from the motherboard.
-
-
-
Remove the front camera from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Baylor, Team S5-G3, Williams Spring 2018 crwdns2935289:0Baylor, Team S5-G3, Williams Spring 2018crwdne2935289:0
BU-WILLIAMS-S18S5G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:09crwdne2935297:0
